Bar Bending Schedule Generator

Enter member details and reinforcement parameters. Click "Add" to append rows to the BBS table below.

Raft Foundation Section

Member Name Unique identifier for this raft Raft Length (mm) Total length (min: 1000mm) Raft Width (mm) Total width (min: 1000mm) Clear Cover (mm) Concrete cover typically 40-75mm Cover Deduction Where to deduct cover No. of Units Number of identical rafts Steel Constant K Default: 162.162

Bottom Main Bars

Diameter (mm) Bar diameter: 6-40mm Spacing (mm) Center-to-center spacing Anchorage Length (mm) Extension at ends Apply Anchorage At Where to add anchorage

Bottom Distribution Bars

Diameter (mm) Bar diameter: 6-40mm Spacing (mm) Center-to-center spacing Anchorage Length (mm) Extension at ends Apply Anchorage At Where to add anchorage

Top Main Bars

Diameter (mm) Bar diameter: 6-40mm Spacing (mm) Center-to-center spacing Anchorage Length (mm) Extension at ends Apply Anchorage At Where to add anchorage

Top Distribution Bars

Diameter (mm) Bar diameter: 6-40mm Spacing (mm) Center-to-center spacing Anchorage Length (mm) Extension at ends Apply Anchorage At Where to add anchorage

Member Name Unique identifier for this raft No. of Units Number of identical rafts Steel Constant K Default: 162.162

Extra Bars - Main Direction

Diameter (mm) Set to 0 to skip Spacing (mm) Center-to-center spacing Length (mm) Length of extra bars

Extra Bars - Dist Direction

Diameter (mm) Set to 0 to skip Spacing (mm) Center-to-center spacing Length (mm) Length of extra bars

Slab Input

Member Name Unique identifier for this slab Slab Width (mm) - Main Bar Direction Total width including cover (min: 500mm) Slab Length (mm) - Dist Bar Direction Total length including cover (min: 500mm) Clear Cover (mm, one side) Concrete cover typically 20-40mm Cover Deduction Where to deduct cover from dimensions No. of Units Number of identical slabs Weight Constant K (optional) Steel density constant (default: 162.162)

Main Bars (longer direction)

Diameter (mm) Bar diameter: 6-40mm Spacing (mm) Center-to-center spacing: 50-500mm Hook Ends Where to add hooks/bends Hook Angle Bend angle for hooks Custom Multiplier (×d) Hook length as multiple of diameter

Main bar bend length: 0 mm

Distribution Bars (shorter direction)

Distribution bar bend length: 0 mm

BBS Output Table

#	Member	Part	Bar Size	Spacing	Bars per Unit	No. of Units	Total Bars	Cut Length (mm)	Total Length (m)	Weight (kg)	Action

Grand Total Length (m): 0.000

Grand Total Weight (kg): 0.000

Grand Total Weight (tons): 0.000

Bar Bending Schedule Generator

Raft Foundation Section

Bottom Main Bars

Bottom Distribution Bars

Top Main Bars

Top Distribution Bars

Extra Bars - Main Direction

Extra Bars - Dist Direction

Slab Input

Main Bars (longer direction)

Distribution Bars (shorter direction)

Beam Section

Top Bars

Bottom Bars

Extra Bars (optional)

Beam Stirrups Section

Stirrups Details

Column Vertical Bars

Vertical Bars

Column Ties Section

Column Tie Details

BBS Output Table

Dia-wise Steel Summary

We Value Your Feedback!